• From the desktop we will double click on the first program P1
• We are waiting for the programme to load
• You will see the start window
• The first box is written in small letters:
• User: admin
• Password: admin
• Here we access the main menu of the i-motion system.
• Let’s go to the first training panel icon
• As we already have our mci linked we will wait a few seconds for it to be placed in Magenta colour.
• We go to the client list to link our client to the Mci, select the match button.
• And it will appear in the first green box indicating that it is perfectly connected and ready to be logged in.
• We press play and raise the intensities to start the calibration.
• End of the process.

• We always start from the main menu
• To do this we should first have our mci or Mcis on (the LED on our mci should be flashing red).
• Once you have checked that the mci is turned on, go to the second configuration icon.
• Here in setup, we must check that we are in the correct Bluethooth tab that will pop up the icon on the left side of the screen.
• If you are not in the Bluethooth tab, click on the first tab and you will see the number of the mci.
• As you can see here in the box, you will see that the number, IM1-plus your M.C.I. code, will be selected in the IM1 and will automatically be marked in blue.
• When you select the mci number it will turn blue, and enable the link icon below it on the right hand side, click, hopefully it will link to the system.
• A COM will appear, it can be Com3 or com4 depending on the linking order.
• We check that the Com3 in this case is the same as the one shown in the right box.
• Below is the unlink icon, when you select the mci it will be enabled in blue, when you click it will unlink the mci from the system. And only the number without the Com will appear again.
• In case you can’t see the MCI number, we have the con
• Then, on the left side, we will look for the first OFF, with the right arrow we will look for the “COM” provided by the software to link the M.C.I
• It must always be verified that it is the same COM to which we have made the link.
• As you can see next to the OFF arrow we have some small numbered boxes, these boxes are used to place our mci in an orderly way on the training panel. They are from 1 to 10.
• Finally, we save in the “blue diskette” icon
• It will automatically take us to the training panel.
• End of the process.

• Always starting from the main menu, click on the third profile icon
• Once inside the window, click again on the upper left icon “create profile
• Our window opens automatically to create our user
• We will create a generic user or client, “demo
  First box we put: demo
  Second box: demo
  Third: demo
• The following boxes do not need to be filled in as you are a generic user
• In the Roles box: we leave by default “Customer
• Select the diskette icon to receive a confirmation alert and say yes
• When we have the details of the real customers, we must fill in all the boxes
  we can confirm our client in the training panel, client list.
• End of the process

• Always starting from the main menu, click on the third profile icon
• Once inside the window, click again on the upper left icon “create profile
• Let’s create a Coach
• First box we put username: The name you will use to log in as trainer1
• Second box First name: the name of the coach
• Third box Last name: the coach’s surname
• Fill in the boxes requested by the system
• Email
• Date of birth
• Phone
• Gender
• Weight
• Height
• And in the role box, we choose the trainer option
• And we remove the Customer
• Select the Blue floppy disk icon and a confirmation alert will appear, saying that the sale will be closed and the name of our coach will appear with the letter T. By way of recognition. On the right side you will find 3 icons
• Password creation
• Edit profile
• Delete profile
• We click on the first icon and in this box we put the password that will be required to log in at the beginning of the software.
• Repeat password
• Click on the green icon
• Now let’s check that our user has been created correctly
• We leave the profile window
• And here in the main menu and select the login icon
• The initial box will appear, which we accessed previously with the username and password admin.
• And we put the username and password of the coach
• And click on the green box.
• To know that we are the coach, we look at this section where it says username; with the current name with which we have entered.
• End of the process.

• Always starting from the main menu, click on the third profile icon
• Once inside the window, click again on the upper left icon “create profile
• Let’s create a Coach
• First box we put username: The name you will use to log in, example admin1
• Second box First name: the name of the administrator
• Third box Last name: the name of the administrator
• Fill in the boxes requested by the system
• Email
• Date of birth
• Phone
• Gender
• Weight
• Height
• And in the role callisa, we choose the option “administrator”
• And we remove the Customer
  select the Blue floppy disk icon and a confirmation alert will appear
  the sale will be closed and the name of our coach will appear with the letter A. By way of recognition.
• On the right side you will find 3 icons
• Password creation
• Edit profile
• Delete profile
  click on the first icon
  and in this box we put the password that will be required to log in at the start of the software.
• Repeat password
• Click on the green icon
• Now let’s check that our user has been created correctly
• We leave the profile window
• And here in the main menu and select the login icon
• The initial box will appear, which we accessed previously with the username and password admin.
• And we put the username and password of the new administrator
• And click on the green box.
• To know that we are the coach, we look at this section where it says username; with the current name we have entered
• End of the process.

In this video we will show you how to synchronise the i-motion system’s database. As a recommendation, we always recommend that you synchronise periodically in order to always keep the database up to date.
In this case, in order to correctly synchronise the i-motion cloud services, we must be connected to the Internet.

• We will start from the initial menu:
• Select configuration
• Now in configuration we go to the second tab
• Where 3 gears appear: there you will find the box of the working modalities.
• We will look for the box that says the last Synchronization plus the date, this will give us for information when was the last time the synchronization was done.
• Now, we look for the synchronize icon at the top of the screen. (this icon with the arrow)
• Select, and a small window will appear from where we will confirm the synchronization, select yes.
• It will load for a moment and the date of the last synchronisation will appear in the box below.
• Finally, to know that we have done it correctly, we go where the date is, we select the icon of “Last Synchronization” in which it will appear in the box of the date to the last period when it was made, in the box where this the date will show us the last time that I have saved the system.

This video shows you step by step how to recharge your M.C.I.

• Introduction: in this video we will teach you how to recognise the alerts shown on the training panel and on the M.C.I. of our i-motion device. This system is set up to work offline, you only need to make an internet connection to be able to run the time load.
  If the mci is not linked, please the tutorial how to link M.C.I
• The alerts are:
• M.C.I. box shown in orange
• Battery indicator in “LOW orange”, no matter if we charge our battery all night long.
• Does not transmit the impulse, (clients do not feel any kind of stimulus)
• The Led indicator, constantly changing in different colours, green, red and orange.
• However, when we recognise any of these witnesses or alerts, we should carry out the recharge of work time, in order to continue with the trainings in a continuous way.
• Note: if our device has time control, which is recommended for smooth and uninterrupted work, recharge every morning, before making the first training.
• Process: if we meet during the training and the warning system tells us that we must recharge:
• Close the i-motion program completely.
• Open the notification centre located in the taskbar on the right.
• Select the wifi icon to connect to the internet, and confirm that we are connected to the network.
• We check that the I.C.M. is on
• At the desk we open the program P1
• We log in if (applicable) in case of using the Free program we access directly
• And we go to the second icon (configuration)
• There we go to the Bluethooth tab, check the correct tab.
• We mark the I.C.M. to which we are going to make the recharge
• In the box in the middle, you will automatically see the COM that you have previously marked.
• Click on the Info icon.
• We hope that you will give us the current information about our M.C.I
• You should see “LIMIT: 0.0.0
• The next step is to press the following icon next to the update icon info button, it will load and say “update Ok
• We ask again for our M.C.I.’s information to confirm that the recharge has been carried out correctly.
• You should see “LIMIT: 5.0.0
• Finally, we must save on the blue diskette at the top and it will take us to the training panel.
• At this point all alerts will have been deactivated and our M.C.I. will return to its natural magenta colour when connected.
• End of the process.